The Lib Tech Dynamiss C3 Snowboard is a powerful, directional freerider that’s surprisingly easy to pilot for how hard it rips down the line. Magne-Traction edges and C3 camber are a recipe for strong, assertive riding on groomers and chopped up snow, and when combined with the slightly set back stance and wide nose, this board handles smooth powder days just as well. But it’s far from some lifeless, aggro plank. The Dynamiss is playful, trickable, and a ton of fun for any day on the mountain.
C3 Camber – Aggressive dominant camber zones out to the contacts combined with mild rocker between your feet. Subtle Banana rocker gives freestyle freedom with maximum end-to-end stability for big, high-speed lines. For aggressive, skilled riders. EJack, Jamie Lynn, and Fredi K’s favorite.
Medium Flex – The most versatile flex in the game for peak performance all over the mountain.
Original Power Construction – 75% Aspen / 25% Paulownia – Light. Environmentally nice. Strong.
Triaxial / Biaxial Fiberglass
Birch Internal Sidewalls
UHMW Sintered Sidewalls
UHMW Tip / Tail Impact Deflection
Eco Sublimated TNT – The highest density UHMW and fastest base material without wax. TNT features a unique dual-layer thermal fusion “phase alteration” process which aligns the molecular chains into an engineered crystalline structure. The titanium layer reflects light and heat, keeping the base at or near snow temperatures. The crystal layer is the fastest base material without wax, making it a very consistent sliding surface in a wide variety of conditions and wax wear lifecycles. Wax to conditions as normal, but the board will remain fast even as wax wears. TNT produces optimal graphic reproduction with the proprietary water based eco sublimation process. Easy to maintain easy to repair.
Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.
Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.
Art by Jamie Lynn
Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
2 x 4 Inserts
- Terrain:All-Mountain, Freeride
- Ability Level:Intermediate-Advanced
- Binding Mount Pattern:2×4
- Edge Tech:Magne-Traction
- Made in the USA:Yes
- Warranty:1 Year
|Effective Edge (mm)||1020||1040||1060||1080|
|Tip Width (mm)||274||279||282||286|
|Waist Width (mm)||239||241||243||245|
|Tail Width (mm)||272||275||278||282|
|Sidecut Radius (m)||7.7||7.8||7.9||8|
|Stance Setback (in)||1||1||1||1|
|Stance Range (in)||17.75-22.5||17.75-22.5||18.5-23.5||19.25-24|