Capita Spring Break Resort Twin

Resort V2 Twin – This revolutionary all-terrain shape has a raised camber platform through the inserts to retain high-speed edge hold through variable terrain, elevated contact points to land and float in powder, and Flat Kick tip and tail arcs for faster, more aggressive transitions.

Flex Rating – 5 (1 Soft – 10 Stiff)

Twin Flex

True Twin Shape

Death Grip™ – Death Grip™ is a design theory that incorporates a reverse sidecut arc in the midsection of the board. This reverse camber arc provides a point of contact to apply pressure and retain control throughout the turn in both freestyle and freeride settings.

Meta Core – The paulownia and poplar P2 Superlight Core gets boosted with shock absorbing beech stringers through the inserts. This gives it increased strength and even snappier pop.

Carbon Fiber Boosters – Increases power and response while remaining ultralight.

Holysheet™ Tri/Bi Fiberglass – Developed over a three-year span, this advanced resin system has a bio-content of 60% renewable, agricultural raw material. It is plant based that does not compete with primary food sources and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. This resin system is poppy, powerful, and extremely durable.

Full ABS1000 Sidewalls

Powerdrive™ Base – Dynamic and durable, easy to maintain and reliable, this “sintruded” base material is electric through the trees and fast over the flats. . Featuring attributes of both sintered and extruded base material the POWDER DRIVE™ base was exclusively formulated for the extra-wide chassis of the Spring Break Powder Division and were designed with the powder lifestyle in min

360˚ HRC48 Steel Edges

Multitech™ Level 3 DeepSpace™ Silkscreen – The DeepSpace™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Stainless Steel 2 x 4 Inserts