Capita Aeronaut 155

Alpine V3 – The Alpine V3 profile has a deeper traditional camber that zeroes out before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a throwback cambered board.

Directional Flex

Flex Rating – 6 (1 Soft – 10 Stiff)

Directional Shape

Progressive Sidecut – This sidecut consists of two or more radii blended together to accommodate the three stages of a turn. It provides easy turn initiation while offering greater control throughout the turn and maximum power while exiting.

0.8″ Setback

Panda Hover Core – This ultra lightweight core is made from paulownia and poplar wood, and is enhanced with bamboo Power Rods™ for maximum power and response.

Holysheet™ Tri/Bi Fiberglass – The HOLYSHEET™ fiberglass configuration features fiber weaves with a high tensile strength and low modulus of elasticity. With a higher roving count in the same weight of glass, you can have a stronger and more responsive board without adding extra weight. It features Triaxial fiberglass on top of the core and Biaxial fiberglass beneath, creating a perfectly blended ride while increasing strength and durability.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

CarbonFlax Amplifiers™

Full ABS1000 Sidewalls

Hyperdrive™ ADV XT Die Cut Base

360˚ HRC48 Steel Edges

Multitech™ Level 4 DeepSpace™ PAM16000 Silkscreen – The DeepSpace™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Stainless Steel 2 x 4 Inserts